TEXTILE SURFACE: Linked with heating process of 380 gr/m2 non-woven polyester textile materials. Manufactured according to the standards of OEKO-TEKS 100.

HEATING SYSTEM: Cr-Ni double helix spiral heating wires, the surface is resistant up to 125 degrees with PVC. With spiral wraps it is 4 times more flexible and secure against breakage. The second layer of the safety wire provides superior protection against overcurrent.

CONTROLLER UNIT: 2*0,50 double coated power cable is used. There is 2 temperature zones (Warm-Hot) on controller units and if necessary it is removable from blanket which the cable has electrical fuse against over-current circuit. High quality STA-300 insulation materials is used in port.

IMPLEMENTATION: Formed by homogeneous lined-up spiral double helix heating wires between two non-woven heat-treated product. To ensure that the alignments are homogeneous PE materials are used between the plates. There are including 2 warm and hot levels of heat. In the control unit on the power cord there is a fuse against the excessive currents (overloads).In any risky case, the fuse blows and the circuit is interrupted. The product will not work anymore, unless you change the fuse assembly with a new one. Because the control unit is detachable from the blanket, only by changing this section products can continue to be used.

TECHNICAL SPECIFICATIONS: 220 V / 0,36 A / 80 WATT / 50 Hz

SIZE: 120 cm * 160 cm

CERTIFICATE: CE / SGS / ROSH

GUARANTY: 2 Yrs