Melsan MP101 04
Melsan MP101 04

TEXTILE SURFACE: Linked with heating process of 380 gr/m2 non-woven polyester textile materials. Manufactured according to the standards of OEKO-TEKS 100.

HEATING SYSTEM: Cr-Ni double helix spiral heating wires, the surface is resistant up to 125 degrees with PVC. With spiral wraps it is 4 times more flexible and secure against breakage. The second layer of the safety wire provides superior protection against overcurrent.

CONTROLLER UNIT: 2*0,50 double coated power cable is used. There is 2 temperature zones (Warm-Hot) on controller units and if necessary it is removable from blanket which the cable has electrical fuse against over-current circuit. High quality STA-300 insulation materials is used in port.

IMPLEMENTATION: Formed by homogeneous lined-up spiral double helix heating wires between two non-woven heat-treated product. To ensure that the alignments are homogeneous PE materials are used between the plates. There are including 2 warm and hot levels of heat. In the control unit on the power cord there is a fuse against the excessive currents (overloads). In any risky case, the fuse blows and the circuit is interrupted. The product will not work anymore, unless you change the fuse assembly with a new one. Because the control unit is detachable from the blanket, only by changing this section products can continue to be used. The two parts functions independently of eachother. In this case, when 2 persons are using it one of them can turn off his/her own side or when one person is using the high temperature (2) the other person can use the less temperature (1) botton.

TECHNICAL SPECIFICATIONS: 220 V / 2 * 0,27 A / 2 * 60 WATT / 50 Hz

SIZE: 140 cm * 160 cm