TEXTILE SURFACE: : With its’ colorful printing patterns; soft and wooly welsoft upper surface and Non-woven bottom surface the textile material is produced spectacular. Due to the soft and patterned structure can be used as a regular blanket. When you pull on yourself as a normal blanket or when you cover your knees, do not use it when it is connected to the electricity.

HEATING SYSTEM: Cr-Ni double helix spiral heating wires, the surface is resistant up to 125 degrees with PVC. With spiral wraps it is 4 times more flexible and secure against breakage. The second layer of the safety wire provides superior protection against overcurrent.

CONTROLLER UNIT: 2*0,50 double coated power cable is used. There is 2 temperature zones (Warm-Hot) on controller units and if necessary it is removable from blanket which the cable has electrical fuse against over-current circuit. High quality STA-300 insulation materials is used in port.

IMPLEMENTATION: Formed by homogeneous lined-up spiral double helix heating wires between non-woven and welsoft heat-treated product. To ensure that the alignments are homogeneous PE materials are used between the plates. There are including 2 warm and hot levels of heat. In the control unit on the power cord there is a fuse against the excessive currents (overloads).
In any risky case, the fuse blows and the circuit is interrupted. The product will not work anymore, unless you change the fuse assembly with a new one. Because the control unit is detachable from the blanket, only by changing this section products can continue to be used.

TECHNICAL SPECIFICATION: 220 V / 0,36 A / 80 WATT / 50 Hz

SIZE: 120 cm * 160 cm

CERTIFICATE: CE / SGS / ROSH

GUARANTY: 2 YRS